Spektrum PowerSafe Receiver Technology:
The AR14410T is a 14-channel receiver with full-range telemetry that uses the Spektrum™ PowerSafe™ redundant battery system. It features connections for full telemetry support including RPM, Flight Pack Voltage and Temperature, and X-Bus. The receiver also has a built-in vario/altitude sensor and mAh sensors that allow tracking of consumed mAh. It can be powered through the servo bus or dual IC3™ connections.
About the PowerSafe Receiver
Technology
Using an optional micro-SD card, the AR14410T can store flight data for later review as a CSV file. It also has a new, push-button PowerSafe LED soft switch or can be powered on and off through the on-board button. Additionally, the system can be put in sleep mode from a compatible Spektrum transmitter and woken up between flights. It can also be powered off from your compatible Spektrum transmitter. Binding can be initiated through a button or a bind plug. The AR10410T can be updated easily through the USB-C connection.
Features:
- Compatible with the Synapse™ AS3X+/SAFE Flight Stabilization Module (SPMAS6000, not included)
- Patented PowerSafe™ redundancy system with dual IC3 connectors. Perfect for power hungry aircraft and high current servo applications drawing up to 35A (50A max burst)
- Forward programming allows for easy adjustments to failsafe settings, servo frame rate settings and more
- Innovative power management system designed with sleep mode allowing pilots to remotely power on/off from the transmitter
- Regenerative servo support for any number of servos
- USB-C port for easy product registration and firmware updates
- 12V capable for use with 12-volt servo applications (must be activated via Forward Programming)
- Integrated battery capacity monitor automatically reports the battery capacity used during flight and can reset automatically when fully charged batteries are installed
- Integrated Black Box telemetry log saves all telemetry data automatically when a Micro SD card is installed (Micro SD card not included)
- Integrated status LED provides helpful information during start up, warnings and mode indicators
Includes:
- (1) AR14410T 14 Channel PowerSafe Receiver
- (1) SPM4651T SRXL2 Remote Serial Telemetry Receiver
- (3) SPM9747 SRXL2 DSMS Remote Receivers
- (1) 9″ SRXL2 Remote Receiver Extension
- (1) 12″ SRXL2 Remote Receiver Extension
- (1) 24″ SRXL2 Remote Receiver Extension
- (1) 36″ SRXL2 Remote Receiver Extension
- (2) Battery IC3 Connectors
- (2) Charge Receptacles
- (1) Aircraft Telemetry Volt Sensor
- (1) Soft Switch
- (1) Instruction Manual
Specifications:
| Application | Air |
| Input Voltage | 3.5-12.6V |
| Channels | 14 |
| Modulation | DSMX/DSM2 |
| Length | 2.6″ (66 mm) |
| Width | 2.4″ (61 mm) |
| Height | 1.75in (44 mm) |
| Weight | 1.9oz (54g) |
| Technology | AS3X+ |
| Telemetry | Yes |
This product was added to our catalog on February 17, 2025
Reviews
There are no reviews yet.