Features
- Ideal for indoor and outdoor small aerobatic park flyers
- High-quality construction with ball bearings and hardened steel shaft
- Up to 30 watts
- Designed for firewall mount or carbon tube mount
- Ideal for 3D models weighing 2–3 oz (55–85 g) and sport and scale models weighing 3–6 oz (85–170 g)
- Upgraded performance for indoor motors
- Includes prop adapter
- 4- to 8-cell Ni-Cd/Ni-MH or 2–3S Li-Po
- Includes mount, mounting hardware and 2mm gold BL connectors
- Extremely quiet and lightweight—just .3 oz (8.5 g)
- High-torque, direct-drive alternative to inrunner brushless motors
Specifications
| Bushing Or Bearing | Bearing |
| Voltage | 4.8–11.4V |
| RPM/Volt (Kv) | 2200 |
| Outer Diameter | 0.63 in (16mm) |
| Shaft Diameter | 1.5mm |
| Idle Current (Io) | .30A @ 8V |
| Resistance | .91 ohms |
| Recommended Prop Range | 3×3 to 6×3 ‘Direct Drive’ for 2S or 4×4 or 4.5×3 for 3S |
| Connector Type | 2mm Bullet |
| Motor Design | Outrunner |
| Motor Type | Brushless |
This product was added to our catalog on December 5, 2007
Reviews
There are no reviews yet.